How To Clean iPhone Ear Speaker Without Damaging It

Are you dealing with dirt, dust particles or wax on your iPhone speakers? Or do you want to maintain the cleanliness of your iPhone's speakers to improve the sound quality when you play music, receive a call or while speaking over a call?

Either way, look no further; in this article, we have compiled some ideas on cleaning iPhone ear speakers to improve the sound quality and maintain your phone hygiene.

Why Should You Clean Your iPhone Speakers?

Did you know that your phone could be one of the dirtiest things you operate daily? Smartphones are habitats of bacteria since you touch them frequently without sanitation. If possible, you should wash your hands as frequently as you touch your phone. To avoid using the speaker s and making the dirty you can use a Bluetooth receiver for headphones so that you do not have contact with you phone and spread bacteria.

As much the bacteria on your phone are invisible, the debris and dirt clogging your iPhone's speakers are quite visible. They may end up reducing the sound quality of the iPhone speaker.

However, cleaning your iPhone speakers frequently is a good idea even if you are not experiencing sound quality issues. If you notice any dust or dirt, you should extract them as soon as possible before they pile up, make way to the small speaker holes, and jam up the speaker grill.

It is worth noting that you could be experiencing audio issues with your iPhone speakers, but that does not necessarily mean it is the hardware; it could be most likely an issue with the software. You could visit g.co privacytools anytime and try to figure out the problem.

Also, do not use liquids or compressed air when you clean any part of your iPhone speaker. Especially when you clean models older than iPhone 7, it could be a problem since they are not water-resistant and have a 3.5 mm headphone jack that damages the phone when the phone gets into contact with water.

To get your iPhone's speakers clean and working, there are specific do's and don't that you should consider so that you don't end up ruining your phone:

  1. You should check that your iPhone speakers are functioning properly. To do this, go to the iPhone settings app and click sounds and haptics.

  2. Please proceed to the ringer and alerts option and drag it back and forth to produce a ringtone sound at different volume levels.

  3. If you don't hear any sound or your ringer volume is dimmed, you should clean your iPhone's speakers before getting in touch with Apple to fix them.

Please don't use any sharp objects to take out the gunk since you might pick important features in your phone that may end up damaging it.

Don't use any liquid or compressed air in cleaning your phone since any liquid might damage your phone.

Which Are The iPhone Earpiece Speaker Grills You Can Clean?

If you are an iPhone user, you are aware that there are two speakers you should be cleaning. If you use iPhone 8 or the newer models, you will see two sets of speaker holes at the bottom of the device.

We will discuss how you can clean the main speaker grills located at the bottom edge. The main speaker grill is prone to dust and clogging, which may reduce sound quality, thus increasing the need to know how to clean iPhone speakers. Let us look at some ways of cleaning iPhone speakers effectively without damaging the earpiece speaker.

Using A Soft Bristled Brush

If you are looking for an efficient method to clean your iPhone speakers, you should use a soft-bristled brush. Apple does not recommend cleaning speaker grills on your own, but you can use a soft-bristled brush if need be.

If you use a toothbrush, you should ensure that the bristles are extremely soft or opt for a soft paintbrush. Paintbrushes are quite soft, and you will be sure they will not hurt your iPhone speaker.

Using Masking Tapes

Using masking tapes to clean your iPhone speakers is more effective than using duct tapes. This is because masking tapes leave less or no residue, adhesive particles after peeling them off and are easier to stick and peel off.

Tear a piece of masking tape and paste it on top of the earpiece speaker, then draw it over the speaker using your fingernails so that the tape can stick on any dirt or adhesives. Finally, remove the tape to get rid of the speaker dust on your iPhone.

Use Tiny Dust Blowers

If you have the tiny dust blowers that blow air when you press the belly part, it is time to put them into use. But, first, force some air into the speaker vents of your phone to remove dust particles.

Using A Toothpick

You can use a toothpick to access bits of debris lodges at the bottom of your speaker holes. Use the sharp point of a wooden or plastic toothpick to access them and gently pop them out. Insert the toothpick tip at minimal pressure, then tilt the toothpick until the dirt pops out. It would be best to direct the force sideways, then up and down to avoid picking inside the phone.

Use Cleaning Slime

When you have used the above methods, and your iPhone's speakers still have some oil or wax mixed dust, you can opt for using cleaning slime or cleaning putty.

First, make cleaning slime like air squares and paste them on your iPhone speakers to remove the dust stuck inside the iPhone speaker holes. Next, you can use the cleaning putt to clean the main speaker grills and the earpiece speaker on your iPhone.

Leave a Comment